测量载重汽车轮廓
智能交通 | 车型、车速检测
车型车速间距流量时间占有率
过宽和过高的载重汽车可能会对基础设施造成事故或损坏。用于自动测量车辆大小,借助二维激光扫描仪 FSD系列或ILS-F10 在难以进入的位置自动测量车辆。三维可视化着重显示凸出的部分以快速定位潜在的危险。
详细信息

通行车辆在高速公路以及一般公路上的超限行为是引发交通事故的重要因素, 也是普遍存在的问题.而二维激光扫描仪为智能交通提供一系列解决方案,可以对超高超宽车辆进行在线检测、车型轮廓识别、以及行驶速度的检测。测量原理利用飞行时间法(TOF),将传感器测出的数据通过PC端管理软件反馈,.如果超出安全规定范围,将会收到报警警告驱使行驶的车俩暂停,避免超行车辆对基础设施造成事故和人身安全伤害。SENKYLASER二维激光扫描仪 FSD系列或ILS-F10 在难以进入的位置自动测量车辆。在检测端安装2台二维激光扫描雷达可形成三维可视化着重显示凸出的部分以快速定位潜在的危险。

Extraterritorial behavior of traffic vehicles on highways and highways is an important factor in causing traffic accidents, and it is also a common problem. The two-dimensional laser scanner provides a series of solutions for intelligent transportation. Super wide vehicles can be online detection, vehicle profile recognition, and speed detection. The measurement principle uses the flight time method(TOF) to feedback the sensor's measured data through PC-side management software. If the safety regulations are exceeded, the two vehicles driven by the alarm warning will be suspended to avoid accidents and personal safety injuries caused by overtaking vehicles to the infrastructure. SENKYLASER two-dimensional laser scanner FSD series or ILS-F10 automatically measures vehicles at hard-to-access locations. The installation of two two-dimensional laser scanning radars at the detection end can form three-dimensional visualization to highlight protruding parts to quickly locate potential hazards.

龙门吊.jpg

推荐型号:

wa_1538120408279589.png

wa_1538120430109077.png

wa_1538120437677978.png

S系列FSD系列ILS-F10系列

扫描半径:20m

      角度:360°

       频率:25Hz

        精度:cm

扫描半径:20m

      角度:360°

      频率:20Hz

       精度:cm级

扫描半径:30m

      角度:270°

       频率:55Hz

       精度:cm级

上海申稷光电

ADD:上海市虹口区广纪路838号A栋501A

TEL:021-60340122 13391208082

QQ:2908837668

WEB:http://www.shsenky.com/

EMAIL:sales@shsenky.com

微信扫码
关注我们
免费预约

申请预约×

立即预约